You are here: HomepageArticles about fixCanon ServiceRefilling the refillable cartridges at the example of Canon ip7240

Advanced search

Refilling the refillable cartridges at the example of Canon ip7240

In this article we show you how to refill the refillable cartridges for Canon. The technology of filling the ink is the same, so we'll show you at the example of PGI-450PGBK / CLI-451Y / CLI-451M / CLI-451C / CLI-451BK cartridges (for printers and the Canon Pixma iP 7240 ; MG5440; MX924).

You can buy the refillable cartridges for Canon here, and here for the Canon Pixma iP 7240MG5440; MX924

Take a set of refillable cartridges with orange caps (Figure 1).

 ПЗК для Canon iP 7240; MG5440; MX924

Figure 1.

There are two holes on the cartridge; one for the filling from which we take out the rubber crock and another one is the air port (Figure 2).

 Отверстия для заправки и воздушное отверстие

Figure 2.

Fill the tray full of ink, by using a syringe with a needle (Figure 3).

 Заливаем чернила в картридж

Figure 3.

Opening the air port. If the filling one is closed, you will need more time in order to the ink soaked into the sponge. Wait until the ink soak into the sponge cartridge (Figure 4).

 Чернила перетекли в губку, не вся губка заполнилась чернилами

Figure 4.

Close the air port by using the crock. If the sponge isn’t fully soaked with ink, then you should fill about the half of capacity into the cartridge (Figure 5).

 До заливаем чернила

Figure 5.

Open the air hole. If the filling hole is closed, you will need more time in order to the ink soaked into the sponge cartridge. Wait until the ink soaks the sponge (Figure 6).

 Губка полностью заполнилась чернилами

Figure 6.

As we can see, the sponge is completely saturated with ink, if the filler hole isn’t closed, close it with a rubber crock. Now we can remove the orange cap and put the refilled cartridge on a napkin or the toilet paper (Figure 7).

 Картридж на салфетке

Figure 7.

Refill all the other cartridges with the same method (Figure 8).

 Комплект заправленных картриджей

Figure 8.

 If you have filled in the cartridge more ink than a sponge can absorb, it will flow out of the cartridge on a napkin, if you insert the cartridge into the printer, the ink will flow to the printer.

In Figure 9, we see that only the yellow and red ink was transfused. Napkin changed, wait a few minutes. If the cloth is clean, insert the cartridge into the printer. Clean the print hand and print a test page.

 На салфетке вытекшие лишние чернила

Figure 9.

In further use of the printer, you will need to refill ink, In order to do this:

1. We put on the orange cap.

2. The air hole should be closed and the filling hole open.

3. Filling the ink into the cartridge.

4. Plugging the filler hole and open the air hole.

5. Remove the orange cap, put the cartridge on a napkin, in order to excess ink flowed on a napkin, not into the printer.

6. Set the cartridge into the printer.

 

Sign in



Bestseller


Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/components/com_jshopping/lib/functions.php on line 657

Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/plugins/jshoppingproducts/bonus_system/bonus_system.php on line 69

Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/modules/mod_jshopping_bestseller_products/mod_jshopping_bestseller_products.php on line 38

Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/modules/mod_jshopping_bestseller_products/tmpl/default.php on line 2
Яндекс.Метрика

   

 

Go to top