Installing the CISS on Epson WorkForce 1100 (Stylus T1100)
The new model of American Printer - WorkForce 1100 (in Russia analogue is T1100).
The printer is different in body color and the cartridge model.
And also have a good build and good plastic.
Outward appearance
From the inside:
The print head
In close-up
Our tasks are installing the CISS and check it in the print.
Step one: put the CISS
To do this, we need to remove the cover closing the print cartridges. Pry off the trigger on the left side and gently remove it.
Remove the cover and move the print head to the middle. I wanted to test the autochips and therefore launched a printer in idle.
We expose a length of the cable, for this move the head to the left and fix the cable.
The printer has started successfully. The CISS chip is reset. The printer has finished the starting cleaning of the ink start went into the preparation. After that I’ve pumped the ink into the CISS.
The nozzle test is excellent. Check the print.
From subjective impressions:
1) Chip allows you to reset without waiting when the ink done which is very good.
2) It’s slowly print the image, while the text and black-and-white are very quick.
3) The color is dark, same as in the T1100. It is necessary to set up.
4) For it price - it is good.