If you bought the MFP Epson XP 207 and your original cartridges are done, it would be better to reduce the price. You can buy the CISS or refillable cartridges. If you don’t print very often you should buy the refillable cartridges. If you print a lot, or don’t want to refill the cartridges by using the syringe you should purchase the CISS. We show you how to install the CISS in this article.
You can see the refillable cartridges for Epson XP 207 in the topic for the Epson reffilable
You can buy the CISS for Epson XP 207 in our online store.
The CISS is made of plastic and the chip. The sequence of colors in the plastic cannot match, you need to look to the cable (if it is not the same, you can swap the labels and corks), Figures 1 and 2. If you want to swap the donors, see the article on the dissasemble of plastic CISS.
Figure 1.
Figure 2.
Installation process on Epson XP 207 is very easy and not different from another models. You can chosse the one you prefer:
The CISS on Epson XP-33
The CISS on Epson XP-103
The CISS on Epson XP-303
First, it is necessary to close the air holes by using the rubber crocks and then poured the ink into the donors by using a syringe (Figure 3).
Figure 3.
You can buy the set of black and colour ink in our online store.
Once you've filled all donors with the ink close the refilling hole and open the air one (Figure 4).
Figure 4.
Once you're done, start to pump out the air from the cartridges and cables, for this take out the rubber crock, insert the syringe and pump out the air by using the plunger as shown in Figure 5
Figure 5.
Once you've sen the ink, carefully remove the syringe and put the crock on its place. Do the same action with every color (Figure 6).
Figure 6.
As a result, you should get as in Figure 7. Ideally to pump out the air as much as possible, or, at least, all the air.
Figure 7.
Insert the CISS while the printer turn off. In order to isert the cartridges into the CISS you need to move the stoppert inside the printer (Figure 8).
Figure 8.
Move the carrriage with the print head to the cartridge replacement position and set the cartridges into the CISS (Figure 9).
Figure 9.
In order to fix the chip to the CISS contact we recmmended you to insert the toothpicks along with adges (Figure 10). You need to break off the two toothpicks
Figure 10
In order to fix the cable move the carriage to the left, set the T-shaped bracket, and insert it in the cable into it (Figure 11).
Figure 11.
Park the carriage and look to the cable. It shouldn't interfere the carriage. Fasten the stopper (Figure 12).
Figure 12.
Turn on the printer. If you need push the button on the chip in order to reset one or more color. You need to do the clean procedure through the computer, if it doesn't help or you don't print on it for a log time then you can clean it by using the washing liquid.
Do the chip counter reset through the PC, and read the article about it.
If you have any problems with the CISS read the article "The CISS: the main troubleshooting".