You are here: HomepageArticles about fixAll about printer resetInstructions for firmware Xerox Phaser 3020 (via USB)

Advanced search

Instructions for firmware Xerox Phaser 3020 (via USB)

Instructions for firmware Xerox Phaser 3020 (via USB)

 

 

Attention!

Firmware Phaser 3020 and WC-3025 INCOMPATIBLE!

Link for order reset Xerox Phaser 3020 and WC 3025 

Make sure the FIX version of firmware is available for order in the generator that is compatible with the current version of printer firmware.

When ordering it is recommended to choose the updated version FIX firmware.

 

Attention!

Report printing is not possible if the printer is blocked!

 

 

1.Print report Xerox Phaser 3020

 

To print the report, both the configuration Xerox_3020 press and hold the button [ WPS] for about 10 seconds (the status indicator starts to blink, then lights steadily, then again starts to blink), then release the button.

 

To print the report Supplies Information, press and hold the button [ WPS ] about 15 seconds (until then, until the status indicator will again begin to light continuously), release the button.

 

To print reports you can use the utility Xerox Easy Printer Manager (set the default printer driver)

 

 

2. The entrance is in enforcing mode

 

When the printer is off, press and hold the button [ WPS ] then press and hold the [ POWER] button, after ~ 2 seconds, then release both buttons.

When log in is successful in enforcing mode, the indicator on the [ POWER ] should illuminate green.

 

 

3. Order of actions for firmware Xerox Phaser 3020

 

- Connect the printer to the computer, waiting for release ready (the driver on the printer to install is not required)

 

- Enter the printer in forced download mode of the firmware. When the printer is off press and hold the button [ WPS ]. Press and hold the [ POWER] button, after ~ 2 seconds, then release both buttons. When log in is successful in enforcing mode, the indicator on the [ POWER ] should illuminate green.

 

- Drag and drop the first file of the firmware 1_Phaser-3020_V3.50.01.08.hd usbprns2.EXE You will see a black window with a running points, which will disappear after a few seconds. This will start the firmware.

 Wait while the printer restarts. After restarting the printer proceed to the second stage firmware.

- Drag the second file firmware 2_FIX_xxxxxxxxxx_Phaser-3020_V3.50.01.08.hd usbprns2.EXE You will see a black window with a running points, which will disappear after a few seconds. This will start the firmware.

Wait until the printer or MFP will reboot.

 

- After the reboot, remove the chip and do not allow the installation of other chip! The toner level will always show 100%.

 

 

Attention!

After flashing remove the chip. Do not allow the installation of other chip

Sign in



Bestseller


Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/components/com_jshopping/lib/functions.php on line 657

Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/plugins/jshoppingproducts/bonus_system/bonus_system.php on line 69

Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/modules/mod_jshopping_bestseller_products/mod_jshopping_bestseller_products.php on line 38

Warning: Invalid argument supplied for foreach() in /home/admin/web/fix-printer.com/public_html/modules/mod_jshopping_bestseller_products/tmpl/default.php on line 2
Яндекс.Метрика

   

 

Go to top