Instructions for firmware Samsung SCX-4825FN
Attention!
Firmware SCX-4825FN, SCX-4824FN and SCX-4828FN are INCOMPATIBLE!
Attention!
Print of report is possible if the printer is not blocked!
Foto1
-Print report Samsung SCX-4825FN
To print configuration
Pressing [MENU] , find { System Setup } click [OK] — press [Left]-[Right],
find: { Report } click [OK] and select: { Configuration} , and then press [OK]
To print [Supplies Information]
Pressing [MENU] , find { System Setup } click [OK]
— press [Left]-[Right] way: { Service } / { Maintenance } click [OK]
then under { Supplies Life } subparagraph { Supplies Information }
and click [OK]
-To view the firmware version on the display of the MFP
click:
[Menu] [#] [1] [9] [3] [#]
-The entrance to the service menu (TECH MENU)
click:
[Menu] [#] [1] [9] [3] [4]
-Entrance in force mode firmware Samsung SCX-4825FN
On MFP off, press and hold the [Stop] button
Turn on the MFP, press the [Power], release [Stop] button and quickly
press the [Stop] button When log in is successful in enforcing mode, the
message on the display of the MFP
{ Download Mode. Press the Stop Key} will be replaced by message,
{ Wait Image }