You are here: HomepageArticles about fixAll about printer resetThe Firmware Upgrade Through The USB

Advanced search

The Firmware Upgrade Through The USB

How to properly upgrade the firmware  

1) Before starting the firmware upgrade process you need to check the printer model, the serial number and, if necessary the number of crum.

 

There are different ways to upgrade the firmware

The first way is through the usblist2.

1) If the fix in the archive unpack it. HD file doesn't need to unpack.

2) Make sure that the printer is connected and your computer recognizes it. You don’t need any drivers. But you need to complete the installation process of new equipment.

3) Make sure that the printer isn’t in sleep mode. Or wake up your printer through the button.

4) Drag the fix into the usblist2 and release them on the program.

5) Starts the process of sending the firmware to the printer. Then starts the firmware upgrade process. Don't stop the process with the power button and don’t made any action with your printer. Don’t touch the printer until the process will done.

6) The printer will restart by itself. Remove or seal up the chip. Check does your printer work or not.

 

About crum:

The chip has to be a new one. Not used in the printer's firmware.

1) Upgrade the firmware with the chip in the cartridge. Seal the chip or remove it after the ending the firmware upgrade process and after rebooting the printer. 

2) The chip must be original. 

3) Check the crum before the firmware upgrade, not after. 

Download usblist2

 

Through the usbprns3

 

Actions from the first to the third point are the same.

4) Drag and drop the fix into the usbprns3.

5) The program asks you to add a new firmware version to the folder where you kept your firmware

 usbprns3 how to

Agree with the program

Check the fix.

 

6) Click on "FixIt" . You can see the firmware upgrade process underneath. 

7) We look forward to restart the printer. Remove or seal the chip. Check does your printer work or not.

Download the latest version of usbprns3

Again about the crum:

The chip has to be a new one. Not used in the printer's firmware.

1) Upgrade the firmware with the chip in the cartridge. Seal the chip or remove it after the ending the firmware upgrade process and after rebooting the printer. 

2) The chip must be original. 

3) Check the crum before the firmware upgrade, not after. 

Comments   

# Resetmuhammad Rizwan Khan 2015-12-13 13:24
Hi, can you help me?
samsung ML-2165w

SN: Z7AVB8GF2B00MEB
CRUM-140216X3117
FIRMWARE: v3.00.01.14
Reply
# Resetmuhammad Rizwan Khan 2015-12-13 13:26
samsung ML-2165w

SN: Z7AVB8GF2B00MEB
CRUM-140216X3117
FIRMWARE: v3.00.01.14
Reply

Add comment


Security code
Refresh

Яндекс.Метрика

   

 

Go to top