You are here: HomepagePrinter reset solutionXerox ResetProgrammed flash set for Xerox 3100 with fax

Advanced search

Programmed flash set for Xerox 3100 with fax (Code: 88)

Hits: 4329 | Rating:
Manufacturer: Xerox
Prices
Price: 10.00 USD
Bonuses for buy: 0.30 USD
plus shipping
Weight: 0.1 Kg
Quantity in stock: 97
Quantity: 
 

Programmed flash set for Xerox 3100 with fax

29lv320 and 24с16

Needs for downgrade printer's firmware to a previous version or used as a repair kit for firmware failure.

 

Manual:

- Desolder 24C16 and 29LV160. Don't forget where are keys on flashes.
24C16's 1-2-3-4th pins turned to 93AA46.
29LV320 1st pin turned down on 24C16 flash.
- Solder a new 29LV160 to a board as usual, without anything else.
- Careful unbend the 7th pin of 24C16 and solder the flash to the board.
- Bin's (a flash on the corner) 1st and 4th pins connect without any desolder.
- Switch on printer but no printing. Let it to initialise.
- The 7th pin need to set on the 8th pin without soldering to the board.

{tortags,88,3}
Comments
Copyright MAXXmarketing Webdesigner GmbH
Яндекс.Метрика

   

 

Go to top