You are here: HomepagePrinter reset solutionXerox ResetProgrammed flash set for Xerox 3100 without fax

Advanced search

Programmed flash set for Xerox 3100 without fax (Code: 87)

Hits: 9805 | Rating:
Manufacturer: Xerox
Price: 8.00 USD
Bonuses for buy: 0.24 USD
plus shipping
Weight: 0.1 Kg
Quantity in stock: 44
Quantity: 
 

Programmed flash set for Xerox 3100 without fax

A model without fax 3100MFP/S.

Needs for downgrade printer's firmware to a previous version or used as a repair kit for firmware failure.

 

Manual:

- Desolder 24C16 and 29LV160. Don't forget where are keys on flashes.
24C16's 1-2-3-4th pins turned to 93AA46.
29LV160 1st pin turned down on 24C16 flash.
- Solder a new 29LV160 to a board as usual, without anything else.
- Careful unbend the 7th pin of 24C16 and solder the flash to the board.
The 7th pin need to set on the 8th pin without soldering to the board.
- Bin's (a flash on the corner) 1st and 4th pins connect without any desolder.
For ver. 2.07 everything the same, but on the bin 93AA46 besides connected the 1st and the 4th pins you sould unconnect the 8th pin.

For ver. 2.05
- Desolder 24C16 and 29LV160. Don't forget where are keys on flashes.
24C16's 1-2-3-4th pins turned to 93AA46.
29LV160 1st pin turned down on 24C16 flash.
- Solder a new 29LV160 to a board as usual, without anything else.
- Careful unbend the 7th pin of 24C16 and solder the flash to the board.
The 7th pin need to set on the 8th pin without soldering to the board.
- Bin's (a flash on the corner) 1st and 4th pins connect without any desolder.
For ver. 2.07 everything the same, but on the bin 93AA46 besides connected the 1st and the 4th pins you sould unconnect the 8th pin.

{tortags,87,3}
Comments
Copyright MAXXmarketing Webdesigner GmbH
Яндекс.Метрика

   

 

Go to top